Menzerna and Detailed Image are now selling both the PO106FF and PO106FA and we hope to provide you with some information about these products so you can understand the differences (or lack there of). Essentially these products could easily pass for being the same, but since there is a slight tweak in the formula we hope to provide you with some of the details. These polishes were designed to work on the harder ceramic clear coats, but they are exceptional on traditional clear coats too. Both products are largely considered light polishes and work best when worked in to the surface with a buffer. They help remove light surface imperfections (i.e. swirls) or haze from more aggressive polishing. Each formula is using the same abrasive particles so you can expect very similar cutting power. We have confirmed the liquid part of the formula has had a slight revision but the exact details of this change have not been released. Some detailers have noticed very little to no difference between these products. Other detailers have found the PO106FA to have a slightly longer work time, while cutting faster and with less dusting. These differences have been slight but to many professionals they are important differences that pay large dividends after many details.

Detailed Image has both products available in different sizes. Currently Detailed Image is stocking the Menzerna PO106FF in the 16oz size and 128oz size. If you select the 32oz version of PO106FF on our site we are sending customers the PO106FA, because of their remarkable similarities. The Menzerna PO106FA is available at Detailed Image in the 32oz size at this time and we do not anticipate it being available in the 16oz size. Menzerna also plans to start calling the PO106FA (Super Finish) in the near future.