Ultimate Washing & Drying Kit
2x Sheepskin Wash Mitts
1x Lake Country Blue Grout Sponge
1x Chemical Guys Maxi Suds II
1x Glass Scrub 8oz
2x Grit Guards
2x Microfiber Waffle Weave Drying Towel (36″x24″)
1x P21S Auto Wash 1000ml
1x Foam Applicator Pad
In this package we have provided you everything you need to complete a thorough and safe washing and drying process. Start off by cleaning your glass with the deep cleaning power of the Glass Science Glass Scrub. Simply apply a nickel sized drop of product on your foam applicator pad and buff it on the glass in a circular motion with medium pressure. Make sure the glass is wet to begin with and thoroughly rinse the glass as soon as you are done.
Now rinse the whole vehicle down so it’s wet and begin spraying the P21S Auto Wash on areas that have stubborn build ups. The P21S Auto Wash is a citrus degreaser designed to safely loosen contaminants from virtually every surface on your vehicle. Agitate these build-ups with light to medium pressure with the Lake Country Blue Grout Sponge. After you are done, rinse the vehicle down and begin your regular washing process.
Place your Grit Guards in the bottom of two 5 gallon buckets and fill them both about two/thirds full with water. In one bucket add 1 – 2 ounces of the Chemical Guys Maxi Suds II and add more water to create a foam lather. Dip your Sheepskin Wash Mitt in the Shampoo and water solution and wash your vehicle from the top down. After washing 1 – 2 panels dip your mitt in the bucket with just water and lightly wipe the mitt against the Grit Guard to help loosen and separate contaminants from the mitt. This will help you wash safer because there is less risk of grinding in contaminants attached to the mitt. Wring out your mitt and then put it back in the shampoo and water mix and repeat this process. Rinse the vehicle frequently during this process and thoroughly when you are done.
After completing your wash pull your vehicle in to a shaded area if you were not already in one. Using your Microfiber Waffle Weave Drying Towel blot dry the surface of your paint. This is the process by which you place the down on the vehicle and let it absorb the water, then pick it up and move it to a new area to repeat this process. By not dragging the towel you help reduce the risk of grinding in any contaminants that could be left on the surface or in the towel.
After completing this process we you can use a clay bar, polish, glaze, sealant and wax to further clean, shine and protect your vehicle. We encourage you to look at our Polish and Protection Packages and other Packages to help complete a thorough detail. To purchase the Ultimate Washing and Drying Kit please click here.