Polish & Protection Starter Kit
1x DI Accessories Gentle Fine Grade Clay Bar
1x Poorboy’s World Spray and Wipe 16 oz
1x Menzerna Intensive Polish
1x Menzerna Final Polish II
1x Poorboy’s World EX-P
1x Poorboy’s World Natty’s Blue Paste Wax
1x Microfiber Applicator Pad

Fully maximizing the results of this process will require that you use a buffer like the ones found in our Porter Cable 7424 Packages or the Flex XC 3401 VRG. Our Microfiber Packages will also help you remove the left over polish, wax, clay lube, etc. from the paint quickly and easily.The Polish and Protection Starter Kit is an excellent package that takes you through all the steps needed to make your paint look like new again. After you have washed the vehicle you would be amazed at just how much contamination will still remain on the paint. Removing all of these contaminants while washing is nearly impossible but using a clay bar will solve this problem. The DI Accessories Gentle Fine Grade Clay Bar will make the clear coat smoother and more transparent. Simply spray the Poorboy’s World Spray and Wipe over a small area (2ft x 2ft) and glide the bar back and forth with light pressure. Remove the excess clay lube with a clean microfiber towel.

Polishing is the step where you can really take your paint to the next level. Swirls, oxidation, fine scratches, etchings, water marks and more can make the paint look dull and faded. Polishes will help remove those imperfections and restore a transparent clear coat, which is needed for the maximum shine. The Menzerna Intensive Polish is a medium cutting polish that will smooth out the clear coat so it’s smoother and more vibrant. This process may leave a very light haze on the surface that is to be expected. The haze will be fully removed with the next step, which is to apply the Menzerna Final Polish II. This light polish or finishing polish is designed to leave the paint extremely smooth and glossy.

After you have cleaned and smoothed out the clear coat with the clay bar and polishes it’s important to protect the surface. This will help prevent future build-ups and enhance the shine. We have selected the Poorboy’s World EX-P for this job because it’s an outstanding sealant. It will protect your paint for 3 – 6 months, add a highly reflective shine while being very easy to apply and remove. The last step we recommend is hand applying the Poorboy’s World Natty’s Blue Paste Wax with a Microfiber Applicator Pad. This carnauba wax will give you the “hard candy” appearance that makes the paint look very glossy. The wax will further protect the paint and really take the shine up a notch.

Completing this process is very rewarding and the results are often a dramatic improvement. To learn more about each part of this process and to get step by step instructions please read our Detailing Guide. To maximize the results from this package we recommend you apply the products with one of our Porter Cable 7424 Packages or the Flex XC 3401 VRG Packages. Using a buffer with the right pads will help you more thoroughly work in the product while saving you lots of energy. To help remove the excess product you should also look in to our Microfiber Packages.