Optimum No Rinse Hyper Foam Reviews

I first started with Quick Easy Wash (QEW) then Optimum No Rinse (ONR) in the early 2000's for rinse-less washing my car. However in the Winter I wanted something more to avoid marring the (Black) paint on my. Something like what the Touch-Less car washes use but that didn't strip the wax on the panels. Well Optimum No Rinse Hyper Foam is that something more.

I mixed 8oz with 1 gal of water and applied it with my IK Foam Pro 12 Sprayer. Foam for days, weeks maybe even months. I wiped the panel down with a sponge then dried the panel with a long nap microfiber towel. I also used another pump sprayer with just plain water to get the foam out of the cracks and seams like in the Door Moulding's and areas on the bumper.

The product cleans very well and smells gr8t. It left my panels really clean.
I admit it can be struggle sometimes dealing with all the foam on the panels. You need to let it dwell long enough so the foam starts to break down.
I brought this product as a means to clean the car when it's covered in road salt and dirt from winter roads. I believe it'll do that very well and it'll take a little trial and error to get the process down.

This works great as a rinseless and has more cleaning power than regular ONR. I haven't tried it in a foam cannon yet as it's freezing here.

I was very impressed with Optimum No rinse Hyper Foam. Put 8 ounces in 1 gallon of distilled water using a IK Foam Pro 12. Foamed vehicle and let it dwell for about minutes. Pressure rinsed off and was surprised how clean it left the paint. Even the little yellow debri, what I refer to as "bee poop" lol was gone. Usually have to manually remove a few with my finger tip as I dry. Followed with a contact wash with rinseless Hyper foam 256:1 dilution. The bucket solution was very clean afterwards surprisingly after going over the whole vehicle. Will definitely be purchasing a gallon when I run out.

I was very excited to try this out and have some foam in a rinseless. The foam was there forever and took a very long time to get out of the cracks and seams. Some foam dried on a black plastic cover the next day that I somehow missed and it became brittle. Foam cannon made too much foam that was hard to dry the car even after a contact wash. Will try it as a pre-wash in a pump foamer before hosing down with blue ONR, then contact wash. It's fine in bucket and was slick. Smell is cherry cough drop.