NanoSkin T1 Top Kote - 50 ml Kit
! We're sorry, this item is currently out of stock
Estimated arrival: unknown.
Out of Stock
$79.99
Use coupon DI499 for $4.99 Shipping on this item
Please note: this product cannot be shipped through the air
Available Sizes
50 ml Kit
$79.99
Product Information
- Protect your paint for years, not months!
- Produces a high-gloss and extremely hydrophobic finish
- Easy to use, self-leveling formula
- Product Code: UL-T12
- Read full description
Product Description
The NanoSkin T1 Top Kote will protect your paint with a glass-like barrier! The secret in this formula is with the special nanotechnology. This technology doesn't create a temporary barrier, it's a permanent coating that will protect your paint for years, not weeks or even months. It is easy to apply and self-leveling, allowing for a high level of ease of use during application. Apply it to the paint, clear coat, glass, plastic, wheels, rubber trim and more for an incredible level of protection that lasts up to 3 years according to Nanoskin! When you are finished applying, T1 forms a durable high gloss, slick, high-density ceramic layer that is extremely warm-looking and hydrophobic. This coating flashes in 40 minutes, allowing you to apply a second coat in under an hour. Reach for the NanoSkin T1 Top Kote and protect your paint today!Contains:
- 1x 50ml T1 Top Kote
- 1x Pair Nitrile Gloves
- 1x Applicator
- 1x Instruction Sheet
- 1x Microfiber Towel
From The Label
Product Description
- "Pro-Consumer" Version of Ceramic Coating
- Easy-to-use, self-leveling formula
- Forms a durable, high-gloss, slick, high-density ceramic layer
- Produces a high-gloss, warm-looking, extremely hydrophobic finish
Directions
To apply ULTRA LINE T1, your vehicle must be indoors annd remain indoors for at least 12 hrs after application.
1. WASH
Thoroughly wash vehicle free of dust, sand, and dirt.
2. DE-CONTAMINATE
Clay/AutoScrub paint surface with Nanoskin Glide Instant Detail Spray Lubricant to remove bonded contaminants.
3. OPTIONAL PAINT CORRECTION
If necessary polish your paintwork to remove any imperfections.
4. DE-GREASE
If you don't have Nanoskin Optimum Layout Panel Wipe with Adhesion Promoter, simply spray IPA 70% onto a microfiber cloth and then carefully wipe down your paint work to remove oil polish residues.
5. APPLY
Soak the Ultra Soft Foam Filled Applicator with proper amount of T1 from the bottle. Spread onto the surface evenly. Allow to haze for 30-45 minutes and remove residue with a clean microfiber cloth.
1. WASH
Thoroughly wash vehicle free of dust, sand, and dirt.
2. DE-CONTAMINATE
Clay/AutoScrub paint surface with Nanoskin Glide Instant Detail Spray Lubricant to remove bonded contaminants.
3. OPTIONAL PAINT CORRECTION
If necessary polish your paintwork to remove any imperfections.
4. DE-GREASE
If you don't have Nanoskin Optimum Layout Panel Wipe with Adhesion Promoter, simply spray IPA 70% onto a microfiber cloth and then carefully wipe down your paint work to remove oil polish residues.
5. APPLY
Soak the Ultra Soft Foam Filled Applicator with proper amount of T1 from the bottle. Spread onto the surface evenly. Allow to haze for 30-45 minutes and remove residue with a clean microfiber cloth.
Customer Reviews
All in all a good coating, its affordable (by volume), comes with everything you need to apply, and looks good on the paint. If I had to give criticize it in any area it's ease of application. Longer than typical flash time (30-45 min), not a big deal just different. It's after the flash time and you have to buff off the residue It's tacky and slightly difficult to remove. To give it a fair shake I tested at the high and low end of recommended flash time and no change. May not be ideal for first timers, vets should give it a try.
