Meguiar's Ultra Pro Speed Compound M110 Reviews

Take my review with a grain of salt as I actually helped develop this product (and the M210 that goes with it), but I can tell you that we did endless comparison testing before launching this and I still to this day (no longer with Meguiar's) use this as my #1 go-to compound 9 out of 10 times. What I went for when developing this was a product that was simply easy to use - less dust (less is more with this product, if you get dusting, use less product), easier wipe-off, and such an insane final finish that depending on the paint/job you sometimes do not even need to polish. Pair this with HDO foam pads for insane finishing.

I've been using Meguiar's products since 1996.

I always viewed them as the gold standard.

I've tried most of the top compounds currently on the market recently. So much that it took me a long time to try the new Megs twins.

Before I took possession of M110 I learned that it didn't require being "primed" like their past compounds, that it's a "less is more" type product.

The first vehicle I used it on was relatively trashed black Bentley. I used Buff and Shine Uro-Fiber on a Porter Cable 7424xp speed 4.5.

I was surprised at the work time of M110. It buffed forever, didn't dust, and cleared out everything but the deepest scratches in about four passes.

I started with four drops and reloaded with three. I was able to keep the fibers fluffed up easily with a brush. Clean out was really dusty, but I see this as a good thing, because it keeps the pad cleaner longer.

So, there time I'll start with another compound, and wonder why I just didn't start with this. I love the super easy wipe off, and smooth buffing feel. I love that it cuts a lot like M100, but without the dust. I love that it leaves an incredible finish.

I'd have to say Meguiar's really out did themselves again.

If feels good to be home again.

I am pressed with that years of working with this new product however, there was much said about no or minimal dust. I have found quite the contrary. I actually change out my pads Very frequently while working and therefore cannot contribute the dust factor to lack of clean pads. The dust is not a problem but there is quite a bit found on adjacent panels while working. Why hasn't anybody else mentioned this? I just don't know

LOVE THIS PRODUCT THOUGH and I will continue to use it!

Works just like everybody told me it would

From a religious 105 meguiars user this is definitely a game changer. If you haven't used this I highly recommend you do !! The first test spot i did was with a Mille and blue wool rupes the outcome was phenomenal. Literally one step in that test pass with minimal micro marring. Could easily pass as one step with the cut and gloss factor . Still purchased meguiars 210 to follow behind with a yellow rupes foam . The outcome unbelievable.. 5 star product

A . Love it and worth the money.

Meguiar's really stepped up to the plate on this compound and knocked a big home run. No slinging and no drying out while working the panel. This product cuts very fast and finishes like a fine polish with a Flex 3401 polisher and a 6 inch Lake Country Blue Hybrid wool pad. I have also used a CCS 6.5 inch yellow cutting pad with amazing results too. A real time saver with zero dust---If you keep the pads clean and pre wet dry pads with Meguiar's final inspection 34. Very easy to wipe off for a beautiful finish. This stuff is going to be the Swiss Army Knife of compounds. Made for rotary of any kind of DA. I have used both with it. Thanks Meguiars for an awesome product.

Quickly becoming one of my favorites! I absolutely hated M105, and although M100 was better I still wasn't a huge fan..just always reached for something else.

Meguiar's really nailed it here. Work time is fantastic, the dusting is minimal or non-existent; even when using a microfiber cutting pad (although it was new). It finished down nicely on a black mustang I was correcting, using a duetto and MF cutting pad, however it did require a second step....which M210 knocked out beautifully!

This is an amazing product has the same heavy cut of 105, even a little faster. It finishes out very well for a compound when used with a microfiber cutting pad, I have no complaints and would highly recommend this to any one!