IK Foam Pro 12 Sprayer - 2 Gal
$125.99
Use coupon DI499 for $4.99 Shipping on this item
Ships today when ordered in the next 10 hrs 12 mins

Available Sizes

2 Gal
$125.99
Product Information
- Easily apply your favorite foaming shampoo!
- Large enough for use on the entire exterior
- Easy air compressor application option!
- Great for detailers with water restrictions and mobile detailers
- Product Code: 82676
- Read full description
Product Description
The IK Foam Pro 12 Sprayer allows you to easily spray foam over an entire vehicle, without the use of a hose, pressure washer, foam cannon or foam lance! In short add water and your favorite shampoo and you can spray foamy suds all over your vehicle for fast and effective washings! The IK Foam 9 Sprayer was already a popular product, but the Pro 12 simply takes this base model and enhances it in so many different ways. Some of the new features include a stainless steel shut off valve, 60 psi safety valve, color cards for chemical identification and 3 foam tips for different types of foam. You still have the same easy to use pump at the top of the bottle, allowing you to pump up the pressure and disperse your favorite detailing chemical with the simple push of the thumb trigger on the lance handle. Hold the trigger and the product within the bottle will be dispersed until the pressure in the bottle has been completely released. The base of the unit is now wider and includes a footstep. This allows the unit to stand sturdy on the ground and allow you to hold it in place while you pump it up. But we saved the best feature for last, an air compressor application. You heard that right, there is an option to hook this unit up to an air compressor if you do not want to pump the unit up! With the Schrader valve attachment, the same type of value you find on tires, you can fill this unit with air. The auto-release safety value will pop up if the pressure is too high, so no need to worry about it blowing up. If you are looking to apply your favorite detailing chemical, the IK Foam Pro 12 Sprayer is a fantastic choice!Important - Run water through the unit and depressurize before storing. This helps stop premature wear on the seals.
Tired of Pumping? - Pair with the IK Battery Compressor and pressureize your unti to 2.5bar/36 psi without any effort!
Videos
The All-New iK FOAM Pro 12 Detailing Pressure Sprayer
Customer Reviews
An excellent product for those who want to do a prefoam or wash foam application but don't have a pressure washer. I used Bilt Hamber Touch-less in mine with the intermediate foam setting and the foam was very good, but a bit dry, so I will use the wet foam setting next time. You also use less product over a foam lance/pressure washer set up. I use a plug in tire pump to pressurize the canister, and attach it to the unit so I have constant pressure, and don't need to recharge a battery powered pump. The unit is solidly built, and will probably last a long time. Spare parts are also available if anything should need replacing.
The IK Foam Pro 12 Sprayer is an excellent item and puts out quite a bit of foam. The assembly was minimal and the added option to fill the sprayer with air from a compressor really works well. The sprayer hold's 8 liters or 2.1 gallons but you have to leave room for adding air. So the usable amount of product is somewhere between 1/2 and 3/4's. I filled it up with 1 gallon of soap and water mix and after adding the air I was able to go around the whole car (Audi A4) and still had about 3/4's of a gallon left. I only needed to charge it once and didn't have any air leaks.
I finally started using this along with optimum power clean and it works ok but I'm struggling with the water to product mixture, along with what tip to use. I've tried em all and it just kinda spits out and every now and then it'll spray like you'd expect. Any thoughts? I've swapped out the filters too. Thanks.
Customers Who Bought This Item Also Bought
Related Categories