Griot's Garage Foaming Surface Prep - 128 oz
$51.99
Use coupon DI499 for $4.99 Shipping on this item
Ships tomorrow when ordered in the next 18 hrs 43 mins
Please note: this product cannot be shipped through the air
Available Sizes
35 oz
$21.99
($0.63 / oz)
128 oz
$51.99
($0.41 / oz)
Product Information
- Removes dirt and grime with high foaming cleaning formula
- Foam clings to paint, softening contamination
- Rinses away clean and easy!
- Safely removes old waxes and sealants
- Read full description
Product Description
The Griot's Garage Foaming Surface Prep shampoo and degreaser helps you deep clean your paint like few other products can. Before you dive into polishing away imperfections, you want to make sure you thoroughly remove contamination and old protection from the paint. This will allow you to polish away imperfections, instead of pushing around dirt and grime, causing more swirls, scratches, etc. Foaming Surface Prep has a high pH blend of detergents and other advanced active ingredients. This unique formulation produces a thick foam that clings to paint, softening road film and organic contaminants (bird droppings, bug splatter, etc.). Let the product dwell for up to 10 minutes and rinse away. The high pH not only helps remove tough dirt and grime, but also removes old waxes or sealant layers, leaving you with a clean surface ready for your polishing steps. This product can be applied by hand or for the best results, via the THE BOSS Foam Cannon. If you are looking for a strong foaming cleaner for dirty cleaning jobs, the Griot's Garage Foaming Surface Prep is a fantastic choice!THE BOSS Foam Cannon Application:
- Select the appropriate tip: Pink Tip - Gas Pressure Washer, Purple Tip - Electric Pressure Washer, Aqua Tip - For Maximum Foam.
- Then screw the bottle to the foam cannon. (Tip choice using a Foaming Sprayer - Pink Tip, then fill the reservoir with concentrate.)
- Mixing Option 2 - MANUAL-MIX: For a traditional RTU (ready-to-use) option, add the corresponding amount of Foaming Surface Prep concentrate to the equipped reservoir, then fill with water.
- THE BOSS Foam Cannon: 1.6 oz, Foaming Sprayer: 2.0 oz, Pump-Up Foamer: 0.5 oz, Air Foamer Sudsing Gun: 0.25 oz.
Foaming Surface Prep Secondary Bottle Application:
- At a 10:1 dilution, Foaming Surface Prep is ideal for pre-treatment and deep-cleaning of bumpers, grilles, hoods, side mirrors, rocker panels, door jambs, trunk jambs, engines, tires, and wheel wells.
- The bottle has a mixing guide on the label with fill lines that ensure you get the proper mix every time.
From The Label
Product Description
Super-Concentrated Cleansing Snow Foam For Organic and Mineral Decontamination
Foaming Surface Prep is a super-concentrated, high-pH snow foam designed to effectively loosen, lift, encapsulate, and release abrasives, as well as organic and mineral contaminants while leaving the surface free of waxes and sealants. As part of our surface prep system, FOaming Surface Prep cleans then carries the debris to the ground to minimize traditional wash-induced scratches and swirls. It is also ideal for deep cleaning engines, undercarriages, and wheel wells.
- Dual-layer foam formula extends dwell time and enhances cleaning action
- Primary foam clings to the surface, softening road film and organic contaminants
- Rich secondary foam slowly releases and carries the abrasives to the ground
Foaming Surface Prep is a super-concentrated, high-pH snow foam designed to effectively loosen, lift, encapsulate, and release abrasives, as well as organic and mineral contaminants while leaving the surface free of waxes and sealants. As part of our surface prep system, FOaming Surface Prep cleans then carries the debris to the ground to minimize traditional wash-induced scratches and swirls. It is also ideal for deep cleaning engines, undercarriages, and wheel wells.
Directions
For use with: THE BOSS FOAM CANNON | Foaming Sprayer | Air Foaming Sudsing Gun | Pump-Up Foamer
Mixing Option 1 - AUTO-MIX: For optimal results use with THE BOSS Foam Cannon Auto-MIX System: Select the appropriate tip:
Pink Tip - Gas Pressure Washer | Purple Tip - Electric Pressure Washer | Aqua Tip - For Maximum Foam. Fill the foam cannon reservoir or a 35 ounce bottle with concentrate and attach to THE BOSS Foam Cannon. (When using a Foaming Sprayer, install a pink tip. Then fill reservoir with concentrate.)
Mixing Option 2 - MANUAL-MIX: For a traditional RTU (ready-to-use) option, add the corresponding amount of Foaming Surface Prep concentrate to equipped reservoir, then fill with water. THE BOSS Foam Cannon: 1.6oz | Foaming Sprayer: 2.0oz | Pump-Up Foamer: 0.5oz | Air Foamer Sudsing Gun: 0.25oz.
USEFUL DIRECTIONS: Paint should be dry and cool to the touch. Select desired application equipment and mixing option. Maintaining a distance of 3 to 4 feet, apply from the bottom up using slow, deliberate, overlapping passes. Allow to dwell for 5 to 10 minutes. Do not allow product to dry on surface. Using a high-pressure rinse from the bottom up and top down, rinse all surfaces free of foam. Follow with Iron and Fallout Remover (which is RTU with any of the foaming application methods) or preferred wash method. Pressure rinse and dry using Griot's Garage PFM Drying Towel.
Tip of the Trade: For stubborn bugs and road grime use Foaming Surface Prep diluted 10:1 and dispense using our Pump-Up Sprayer or secondary bottle. Spray on and allow to dwell for 2 minutes prior to applying Foaming Surface Prep to entire vehicle via foam cannon or foaming sprayer.
Mixing Option 1 - AUTO-MIX: For optimal results use with THE BOSS Foam Cannon Auto-MIX System: Select the appropriate tip:
Pink Tip - Gas Pressure Washer | Purple Tip - Electric Pressure Washer | Aqua Tip - For Maximum Foam. Fill the foam cannon reservoir or a 35 ounce bottle with concentrate and attach to THE BOSS Foam Cannon. (When using a Foaming Sprayer, install a pink tip. Then fill reservoir with concentrate.)
Mixing Option 2 - MANUAL-MIX: For a traditional RTU (ready-to-use) option, add the corresponding amount of Foaming Surface Prep concentrate to equipped reservoir, then fill with water. THE BOSS Foam Cannon: 1.6oz | Foaming Sprayer: 2.0oz | Pump-Up Foamer: 0.5oz | Air Foamer Sudsing Gun: 0.25oz.
USEFUL DIRECTIONS: Paint should be dry and cool to the touch. Select desired application equipment and mixing option. Maintaining a distance of 3 to 4 feet, apply from the bottom up using slow, deliberate, overlapping passes. Allow to dwell for 5 to 10 minutes. Do not allow product to dry on surface. Using a high-pressure rinse from the bottom up and top down, rinse all surfaces free of foam. Follow with Iron and Fallout Remover (which is RTU with any of the foaming application methods) or preferred wash method. Pressure rinse and dry using Griot's Garage PFM Drying Towel.
Tip of the Trade: For stubborn bugs and road grime use Foaming Surface Prep diluted 10:1 and dispense using our Pump-Up Sprayer or secondary bottle. Spray on and allow to dwell for 2 minutes prior to applying Foaming Surface Prep to entire vehicle via foam cannon or foaming sprayer.
Customer Reviews
Absolutely I really like testing pre-washes… This one is iin my top five for sure! I found the dilution rate in a former sprayer is 15 to 1 does a great job with a dwelling time of about three minutes..
Worked great, make sure to let dwell for long as possible without letting it dry. Rinses away nicely as well.
Read all customer reviews of Griot's Garage Foaming Surface Prep
Customers Who Bought This Item Also Bought
Related Items
Related Categories
