Gtechniq PW Panel Wipe - 250 ml
$9.99
Please note: this product cannot be shipped through the air
Available Sizes
250 ml
$9.99
($0.04 / ml)
5 L
$119.99
($0.02 / ml)
500 ml
$19.99
($0.04 / ml)
Product Information
- Removes all polish residues with ease
- Promotes bonding for C1 Crystal Lacquer and EXOv2 Ultra Durable Hybrid Coating
- Contains no fragrances or colors
- Product Codes: PW 0.25 x12, PW 5 x2, PW 0.5 x6
- Read full description
Packages That Include This Item
Product Description
The Gtechniq PW Panel Wipe is specifically formulated to remove oils and other residues from surface, prepping them for any coating application! Many times polishing oils and residue can negatively effect the way sealants, waxes, or coatings bond to the surface. PW is designed to remove all these oils and residues so that semi-permanent coatings, such as C1 Crystal Lacquer and EXOv2 Ultra Durable Hybrid Coating, can form a durable bond with your vehicle's paintwork. Simply spray PW directly onto a clean microfiber towel and wipe away, it is that easy! The unique blend of pure alcohols and aromatic solvents are formulated specifically to give adequate working time to remove and dissolve polish residues. PW will then evaporate to leave a 100% decontaminated surface! If you are looking for a surface that is truly clean and ready for any form of protection, use the Gtechniq PW Panel Wipe!Important: This item cannot be shipped, sold, or used in the state of California. CARB in California claims this item breaks their VOC regulations.
Videos
How To Use Gtechniq Panel Wipe PW
Applying Gtechniq Panel Wipe
From The Label
Product Description
Panel Wipe is designed to remove all polish residues so that chemically bonding coatings can form the maximum volume of bonds with your vehicle's paintwork. Panel Wipe is a blend of pure alcohols and solvents formulated to remove and dissolve polish residues and then 'flash-off' to leave a 100% decontaminated surface.
Directions
- Shake well before use, wear gloves and use out of direct sunlight.
- Spray onto a MF1 ZeroR Microfibre Buff Cloth and wipe onto the surface.
- To make sure the surface is residue free, over-wipe with a dry MF1.
- Store in a cool, dry place.
Not suitable for use on PPF, vinyl, plastic or rubber. Avoid use on smart repairs and resprays.
Customer Reviews
Works great. Removed the polishing oils and allowed for my Gtechniq Crystal Serum Light to be applied. I did not notice any kind of crazy streaks or difficultly in removing the residue when I did mine. Sprayed onto my microfiber and wiped on.
It works grate
This is by far the best oil remover I've used. I use it before installing ceramic coatings and/or waxing a car. Will definitely buy more!
