CarPro Cquartz Leather Coating 2.0 - 50 ml
$99.99
Use coupon DI499 for $4.99 Shipping on this item
Ships tomorrow when ordered in the next 15 hrs 26 mins
Buy now and pay over time with PayPal Credit. Learn more
Please note: this product cannot be shipped through the air
Available Sizes
30 ml
$64.99
($2.17 / ml)
50 ml
$99.99
($2.00 / ml)
Product Information
- Protect your leather and vinyl surfaces for 1-2 years!
- Prevents staining from oils, grease, makeup, coffee, etc.
- Easy application!
- Future cleanings will take much less effort
- Product Codes: CP-111CQL, 111CQL5
- Read full description
Product Description
The CarPro Cquartz Leather Coating 2.0 allows you to protect your leather and vinyl surfaces with only a few easy steps! As a car lover, many of us enjoy the smell, look and feel of brand new leather. With each passing day you get in and out of the car bringing in dirt and grime while the leather is exposed to UV rays and contaminants that detract from the leather's look, feel and smell. These actions are inevitable however, they can have a real negative effect on your leather if you do not take the proper precautions. For the best longevity of your leather seats, you want to keep them clean, nourished and protected. The CarPro Leather Coating is not cleaner, it's strictly meant to offer you an amazing level of protection that will keep your leather looking new.Using high end ingredients and a water based formula, CarPro Cquartz Leather Coating was produced to offer an outstanding appearance without any artificial gloss. Once applied (application instructions below), you will notice how soft the leather feels and an amazing level of protection from stains including the dreaded blue jean dye transfer. The protection doesn't stop there, it also blocks out harmful UV rays that can crack and fade leather. It is hydrophobic, has self-cleaning properties, as well as resistance for abrasion and stains. Some other leather protectants will last weeks or a few months, but this coating lasts around 1-2 years! This allows you to protect your seats from harmful elements for much longer than a traditional leather protectant.
If you are looking to keep your leather or vinyl pieces looking their best, the CarPro Cquartz Leather Coating 2.0 should be your choice!
Precautions:
- Confirm any leather is standard durable finished leather and not a "weak dye" leather material that can be easily damaged.
- Currently there are a variety of leather and vinyl materials with a variety of coatings used by many auto manufacturers. It is not possible to acquire or test this number of surfaces, therefore users must test in an inconspicuous area first to check for any issues.
- Use ONLY white applicators.
Directions:
- Thoroughly clean all dirt, moisture, and oils from surface with non-oily, interior safe cleaner that leaves no sealant or dressing
- Wipe with a water damp towel to remove residue from your cleaner if needed
- Pour at least 10 drops or one small strip onto the suede wrapped applicator
- Work CQuartz Leather into the surface including all creases, and texture
- Gently wipe off any excess within 2-3 minutes (may vary with temps and leather type)
- You apply another layer after 30 minutes from start of the first application
- Touch dry after 10 min / Avoid water for 4 hours / Fully cured at 3 days
IMPORTANT NOTES:
- As of 1/13/17, the CarPro Suede Cloths changed from orange to white. The orange color of these cloths caused issues with certain lighter leather colors. CarPro now recommends only applying with the white suede cloths on lighter color leather.
- Leather 2.0 Update - March 2021 - The new formula is water-based and therefore safe to use on all types of leather, including Nappa leather. The new Leather 2.0 only improves on the hydrophobic, self-cleaning properties, as well as resistance to UV, denim dye coloring, abrasion and stains.
Videos
Cquartz Leather coat 2014
From The Label
Product Description
CQUARTZ LEATHER
- EXTREME STAIN & DYE TRANSFER RESISTANCE
- HIGHLY HYDROPHOBIC UV PROOF
Directions
DIRECTIONS:
- Thoroughly clean all dirt & oils from surface with non-oily interior safe cleaner.
- Wipe with a damp towel followed by dry towel to remove residue from cleaner.
- Pour at least 10 drops or one small strip onto suede wrapped applicator.
- Work CQuartz Leather into the surface including all creases, and texture.
- Gently wipe off any excess within 2-3 min.
- Touch dry after 10 min. Avoid water for 4 hours. Fully cured at 3 days.
Customer Reviews
I put this on the red (really more of a wine color) leather seats in my new Mazda CX-30. It takes a bit of effort to cover the perforated leather evenly, but it's worth it. Smooth leather on the bolsters, center arm rest and steering wheel were easy. everything looks good and has a nice feel.
Used it in a paint sprayer, and it worked very well less product, and more fine layers of protection.
Very impressive. I tried in on the driver's seat. I applied two coats and am pleased with the results. No issues with application or removal of excess product while following directions. I will be applying to all plastic and vinyl as well. The sheen starts to diminish after a couple of days and after a week it is fully cured with a completely natural look to the leather. I definitely recommend this product.
Read all customer reviews of CarPro Cquartz Leather Coating 2.0
