Sonax Profiline Perfect Finish is truly the perfect finishing polish! This outstanding polish was designed to finish down your paint, removing haze and leaving behind an ultra smooth finish at the microscopic level. You can use this product after more aggressive polishing to help remove any surface haze, light imperfections, etc. You can even use Perfect Finish as a great one step polish! It will provide enough correction to remove light to medium imperfections, a level of finish that puts it in elite company, and doing all of this in an amazing amount of time. Perfect Finish can achieve a high level of correction in as little as an hour and a half! Simply apply with a buffer and a finishing pad (ie Lake Country Black Finishing Pad) if you are using it as a finishing polish, or a polishing pad (ie Lake Country White Polishing Pad) if you are using it as a one step polish. One of the primary advantages of this product is how it finishes down so well even on those soft and finicky paints, that can be challenging to work on. Perfect Finish is an absolute must have product for these soft finishes so you can get perfection in a very short amount of time.
Perfect Finish has a thicker consistency and it has the tendency to saturate pads more frequently than other polishes. For the best results be sure to change your pads frequently, 3 to 4 pads per car is a good rule of thumb for absolute maximum results. If you are looking for a great finishing, or one step polish that will leave your paint crystal clear, the SONAX Profiline Perfect Finish is for you!
OK, I know what your thinking “Just what I need another polish!” If your like me you probably have a TON of them, and chances are you have your “go to” products. You tend to get an idea of what you will need for correction and reach for that. A good way to know for sure is by doing a test spot, Chad discusses that here in his article on What is a “Test Spot” and why is it important? With that said Sonax Perfect Finish has become one of my main “go to” products.
What makes Sonax Perfect Finish such a stand out compared to other polishes. The cut, finish, and ease of use just to name a few. On softer paints you can get correction that previously you would need to have performed at least a two step correction process. The key here is correction and finish. PF will finish down really well, as well as a dedicated finishing polish.
Another major benefit of PF is the way it removes from the surface. With very light wiping using a Great White MF the product simply wipes off the surface. No struggling, or fighting the polish. M105 is an amazing product, however it does have some limitations. It tends to dust quite a bit, and at times removal from the surface can be near impossible, to the point where another polish is needed to remove M105 from the surface. This is where Perfect Finish comes in! Simply add a drop of PF to your 3 pea sized drops of M105, dust is reduced and removal from the surface becomes much easier. By doing this you are not reducing the cut of the 105, but you are simply making it easier to use.
Speaking of dust, let’s discuss that. If you are like me you hate polishing dust. It gets everywhere, it stinks to clean up and is just messy. Whenever I hear “NO Dust” I get skeptical. While I will not say there is no dust, I will say PF has such little dust it’s a pleasure to work with. I could compare it to the amount of dust you get from wiping off Blackfire Wet Diamond.
The gloss level of paint is amazing when using PF. Here is a recent BRZ that was super reflective. Not many products finish, correct, and have the ease of use like PF.
Is it worth having another polish in your arsenal? This time it is! PF is such a good polish that I sent a couple of samples to some fellow detailer’s throughout the nation and now each one of them has purchased PF and is using it daily.
As always thanks for reading! 🙂