When we developed our Aquatek authorized only signature coating Singular, we knew we had created something special. Our network of installers love the ease of installation and performance of Singular. So, when we decided to make a coating for the masses, we decided to take our signature coating and make a junior version of it. Something new with features not commonly found in today’s coatings. Introducing, Aquatek Select Advanced Glass Coating for paint finishes.
What Makes Aquatek Select Different
When we designed Select, we wanted to make a coating that would be extremely easy to install by even the most beginner of installers. Ease of installation under various conditions. Under arid, humid, cold and hot climates with hassle-free installation. Durability of up to 3 years with proper maintenance. An ultra-fast tack time of 3 hours and a cure time of 48 hours. Additionally, giving the wet-look gloss everyone loves with a hardness that makes it perfect for the daily driver. We didn’t reinvent the wheel, but we certainly made it a little snazzier. Even professional Detailers would agree that Aquatek Select is a solid choice and many of our Aquatek Installers use it in their shops.
How to Install Aquatek Select
At Aquatek, whether you are a professional detailer or detailing enthusiast, we take pride in making our products easy to use. Using a ceramic coating can seem like a really daunting task for the first-time user. So here’s some helpful information to help you make your installation of Aquatek Select a success, along with some useful tips and tricks.
Prior to installation of any ceramic coating, it is important to have the vehicle properly washed, prepped and paint corrected before installing a coating.
Tools Required for Installation of Aquatek Select.
- Aquatek Select
- Rubber Gloves
- 2 Microfiber towels (The Rag Company Eagle Edgeless 500 recommended)
- Applicator (Autofiber Saver Applicator Pad is recommended)
Applying Select onto the Paint Surface
When opening the box of Aquatek Select for the first time, look for the applicator insert it into the bottle prior to using. We designed our insert with an easier to pour design in mind to allow for the coating to be applied generously onto the applicator pad. We found that other bottle inserts can be a struggle to put the appropriate amount of coating onto the applicator pad. Often causing the installer to not put enough coating on the paint surface, affecting the quality of the installation and performance.
Once the insert is installed. Apply a line of coating onto the applicator pad. Approximately 5 to 6 light shakes onto the pad. We recommend using a pad such as the Autofiber Saver Applicator Pad. Choose one color and stick to that color during the application process. Using a Saver Applicator Pad maximizes the output of coating onto the surface and keeps the coating from soaking into the internal sponge as found in other applicators.
Now that your applicator is loaded with Select, apply to the surface using even, overlapping movements. To ensure proper coverage, use a crosshatch pattern and applying small sections at a time, working panel by panel is recommended. For instance, if working a hood, break the hood into 3 to 4 different sections, rather than doing the whole hood.
Once the coating is applied onto the surface, wait approximately 30 to 60 seconds and using a clean microfiber towel, wipe the surface evenly until the surface appears clear. Under humid conditions, the coating may require to be removed faster. One indication that may help is seeing a rainbow type effect onto the surface where the coating was applied. This will help let you know that it is ready to be buffed with your microfiber towel. Make sure to wipe the surface until the paint finish appears clear or streaks or haze. Use the second towel and wipe a final time to ensure proper leveling and to avoid leaving “high spots” or excess coating on the surface.
Once you wipe the surface, scan the area for any leftover product that was not leveled properly before starting a new panel. It is recommended to go panel by panel to make the installation easy to manage. This makes it easy in case you have to pull away from your project for any reason.
High Spots and Final Inspection
Ask any professional and they will certainly tell you the high spots are something that no coating project should ever have before leaving their shop. It’s always important to check your work for high spots before moving onto the next panel. Once you have completed coating the entire vehicle, we recommend that you check the vehicle outside in the sun from various angles to check for high spots. If you are checking the vehicle within 2 hours of installation, most high spots can be easily leveled with a microfiber towel. If you find a high spot after the 3-hour tack time, use a very light polish on a microfiber towel to level out the high spots.
Tips & Tricks for Using Aquatek Select
- Wipe your bottle and cap clean with a junk microfiber towel to keep coating residue from hardening and making the next use cleaner and keeping residue coating getting onto the applicator pad.
- You can re-use your microfiber towels after coating. To do this, fill a bucket with warm water and use 2 oz. of P&S Rags to Riches and immediately soak your towels into the solution after use. This keeps the coating from hardening on the towel. Wash them separately from your other towels. Giving you more uses on your coating towels. Unfortunately, this is not recommended for the applicators. You will have to dispose of them after each use.
Using Aquatek BLISS and SYNTH with Select
- For a slicker finish and additional depth of gloss, apply Aquatek BLISS immediately after installing Select onto a panel. BLISS is designed to integrate and bleed into the coating, giving the effect of BLISS added durability compared to traditional topper coatings. For instructions on how to use BLISS, check out the article on Aquatek BLISS. Make sure to install BLISS during the coating process and not after the 3-hour tack time or full cure. You can use BLISS with any coating installation.
- Another way to give additional slickness and gloss enhancement is by using Aquatek SYNTH onto Select. It’s important to note that unlike BLISS, SYNTH is designed to be installed after the 3-hour tack time or full cure.
- For an insane slick finish and high gloss look, we recommend you install Select, BLISS during the coating process and finish off with Aquatek SYNTH after the 3-hour tack time.
- When using Aquatek SYNTH, we recommend spraying SYNTH onto a microfiber towel and then onto the surface, then buffing until clear with an additional microfiber towel.
In Closing
We feel that you are going to love how easy it is to install Aquatek Select and the performance we put into it. An average install time on a sedan is around 30 minutes with Aquatek Select. Keep in mind that we designed Select to be a one-coat design just like our other coatings. This makes coating with Select economical, efficient and one of the easiest coatings to install on the market today. We invested in technology to make the cure time faster, making it easier for shops and detailing enthusiasts to use Aquatek Select. By eliminating the need to have to wait for 12 hours or longer to release a vehicle or the inability to release a vehicle under inclement weather. When we were developing Select, we lovingly called it Singular Jr. and we feel that we certainly made a special coating that gives everyone a taste of what our Aquatek Authorized Installers offer with Aquatek Singular. If you are considering a ceramic coating that checks a lot of the boxes that professionals want in a coating, then consider Aquatek Select.