303® Fabric Guard™ - 16 oz
$19.99
Please note: this product cannot be shipped through the air
Available Sizes
16 oz
$19.99
($1.25 / oz)
32 oz
$29.99
($0.94 / oz)
128 oz
$89.99
($0.70 / oz)
Product Information
- Protects carpet, canvas and upholstery from staining by repelling liquids
- Makes maintaining interior carpets, floor mats and canvas seats significantly easier when protected
- Works great on canvas convertible tops and outdoor patio furniture
- Formally known as the 303 High Tech Fabric Guard
- Made in the USA
- Product Codes: 30605, 30606, 30607
- Read full description
Product Description
Just spray the 303 Fabric Guard (Formally known as the 303 High Tech Fabric Guard) on any fabric and the strong solution will bond to your carpets and seal the fibers for long lasting protection. Even the most careful owners can accidentally step in grease or have careless passengers that stain fabrics. The barrier created by the Fabric Guard will help repel stains, soil, harmful UV rays, water, mildew, salt, soda, coffee and anything else your fabrics come in contact with. This product has saved many people from scrubbing out embedded stains, excessive soil build-up, spills and more. It's designed for use on carpets, fabric seats, fabric/canvas convertible tops, fabric upholstery and more. It's critical to use spray on a coating of the Fabric Guard before winter, to prevent nasty salt stains that can be really tough to clean. Don't forget to use it in the summer months as well to prevent UV fading. The strong bond it forms with any fabric protects the surface while still allowing the fibers to breathe and remain flexible. Contamination build ups and accidents will happen and the 303 Fabric Guard will be there to protect your fabrics.Made in the USA
Professional Detailer Reviews
This product is incredibly easy to use, as you simply spray the Fabric Guard over the entire area and leave it to dry.
From The Label
Product Description
- Repels moisture & stains
- Manufacrurer recommended
- Safe for All fabrics
.
Directions
Directions: Spray product onto fabric until evenly wet, overlapping areas in a criss-cross pattern, and let dry. Do not oversaturate. Treated material must be protected from rain/dew until completely cured.
Cure Time: 12 - 24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. Re-application will be as needed, depending on fabric exposure to sunlight and weather conditions. To determine if fabric needs re-treatment, pour water on fabric. If water soaks into fabric, re-treatment is needed.
Coverage: 40 - 75 sq. ft. (3.7 - 7 sq. m) per 16 fl. oz. (473 ml) depending on material and application method.
Use product outdoors only, in supplied packaging. Use only on thoroughly CLEAN, DRY fabrics. For best results when cleaning, use 303 Multi-Surface Cleaner. Warning: Do not use on vinyl, clear vinyl, plastics, rubber, fiberglass, imitation suede, or carpet/rugs. Damage will result from use. Protect these and other surfaces from overspray, wipe up overspray immediately. Always test for color fastness! Spray 303 Fabric Guard in a hidden area of textile. Wipe test area with a white absorbent cloth. If any color rubs off DO NOT USE.
Product liquid and spray are flammable - keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303 Fabric Guard. Apply until evenly wet, onto overlapping areas. Apply product to fabric in temperatures above 70 degrees Fahrenheit/21 degrees Celsius (for quicker drying/curing and best results, apply in full sun).
Cure Time: 12 - 24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. Re-application will be as needed, depending on fabric exposure to sunlight and weather conditions. To determine if fabric needs re-treatment, pour water on fabric. If water soaks into fabric, re-treatment is needed.
Coverage: 40 - 75 sq. ft. (3.7 - 7 sq. m) per 16 fl. oz. (473 ml) depending on material and application method.
Use product outdoors only, in supplied packaging. Use only on thoroughly CLEAN, DRY fabrics. For best results when cleaning, use 303 Multi-Surface Cleaner. Warning: Do not use on vinyl, clear vinyl, plastics, rubber, fiberglass, imitation suede, or carpet/rugs. Damage will result from use. Protect these and other surfaces from overspray, wipe up overspray immediately. Always test for color fastness! Spray 303 Fabric Guard in a hidden area of textile. Wipe test area with a white absorbent cloth. If any color rubs off DO NOT USE.
Product liquid and spray are flammable - keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303 Fabric Guard. Apply until evenly wet, onto overlapping areas. Apply product to fabric in temperatures above 70 degrees Fahrenheit/21 degrees Celsius (for quicker drying/curing and best results, apply in full sun).
Customer Reviews
Great product and endorsed by Sunbrellla to restore water repellency to factory specs. Great customer service and fast shipping will for sure buy again
Best product I have used for outdoor fabric. It really sheds water and makes cleaning easy. I even used it on my boat cover and it prevented rain and melting snow from pooling on low spots.
Also used for outdoor patio cushions and my grill cover. I have recommended this to a lot of other friends because it has worked so well.
Also used for outdoor patio cushions and my grill cover. I have recommended this to a lot of other friends because it has worked so well.
This product provides excellent protection and makes cleaning a breeze. I will add that if you plan on using this on interior carpets, it takes some time for the odor to go away.
