Stoner Trim Shine Vinyl & Plastic Coating - 12 oz
$7.99
Ships tomorrow when ordered in the next 35 hrs 42 mins
Please note: this product cannot be shipped through the air
Available Sizes
12 oz
$7.99
Wipes 28 Count
$5.99
Product Information
- Restores and UV protects vinyl, plastic and rubber using a clear, colorless, non-greasy formula
- Works great on faded trim, bumpers, in the engine bay, running boards, rubber moldings, AC vents and more
- Two great formulas, spray or wipes!
- Product Codes: 91034CSTON01, 90034
- Read full description
Product Description
Stoner Trim Shine is a do it all trim restorer that gives you everything you want in one container. It helps eliminate any old wax build up and other contaminants while leaving behind a gorgeous dark finish and UV protection. It makes virtually any plastic, vinyl or rubber surface look like new again. It can be used on faded trim pieces, bumpers, engine bay casings, running boards, rubber moldings, AC vents, dashboards, doors and so much more! Simply spray it on and you are done. Looking for something easier to control? Use the wipes instead! Stoner utilizes a special proprietary technology that allows their aerosol products to dry instantly. So there are no smears, just a beautiful shine and lasting protection. Try the quickest and easiest to use trim care product with the Stoner Trim Shine!Professional Detailer Reviews
Stoner Trim Shine leaves a nice glossy finish while not leaving a greasy surface like many dressing do.
Videos
Trim Shine 60 Second Overview
Trim Shine Overview
From The Label
Product Description
Trim Shine
Trim Shine Vinyl and Plastic Coating is the fast and easy way to coat vinyl, plastic and other automotive surfaces.
Trim Shine Vinyl and Plastic Coating quickly coats:
Trim Shine Vinyl and Plastic Coating is so simple and easy to use, just spray and walk away.
For more than 20 years, Stoner has developed and manufactured auto detailing products for professionals. Now, with this easy-to-use aerosol, you too can get the same results demanded by professional detailers. show car collectors, and finicky auto enthusiasts.
Trim Shine Vinyl and Plastic Coating is the fast and easy way to coat vinyl, plastic and other automotive surfaces.
Trim Shine Vinyl and Plastic Coating quickly coats:
- bumpers
- dashboards
- moldings
- door gaskets
- under-the-hood surfaces
- trim strips
- consoles
- vinyl seats
- hoses
- vinyl tops
- door panels
- air vents
- gear shift boots
- and much more
- Doesn't run, drip or streak. Hides white hazing and wax marks on dark auto trim. Won't harm glass, chrome, metals, or paint finishes.
Trim Shine Vinyl and Plastic Coating is so simple and easy to use, just spray and walk away.
- The fast and easy way to give cars, trucks, vans, SUVs, RVs, motorcycles, and boats a like-new, showroom look.
- Trim Shine Vinyl and Plastic Coating saves you time and effort. Requires no messy rubbing or wiping. No need to use cloths, wipes, or brushes.
- Ideal for air dams, and other areas which are difficult or impossible to wipe.
- Clear, colorless, non-corrosive, non-greasy, and long lasting. Safe to use on most materials, but always test first.
For more than 20 years, Stoner has developed and manufactured auto detailing products for professionals. Now, with this easy-to-use aerosol, you too can get the same results demanded by professional detailers. show car collectors, and finicky auto enthusiasts.
Directions
DIRECTIONS: Read entire label before using.
IMPORTANT - Stoner Trim Shine Vinyl and Plastic Coating is slippery and should NOT be used on or near gas, brake, or clutch petals; steering wheels; motorcycle or bicycle seats; or other surfaces adversely affected by a slippery coating.
HELPFUL HINTS FROM THE PROS: Although Trim Shine and Vinyl and Plastic Coating will not harm or discolor most materials, always test first in a small, out-of-sight area before using. Not recommended for suede and other absorbent surfaces which may discolor. Trim Shine Vinyl and Plastic Coating will spray best when contents are at room temperature. Lower temperatures may reduce spray pressure.
IMPORTANT - Stoner Trim Shine Vinyl and Plastic Coating is slippery and should NOT be used on or near gas, brake, or clutch petals; steering wheels; motorcycle or bicycle seats; or other surfaces adversely affected by a slippery coating.
- For best results, wash vehicle to remove dust, dirt, and other contaminants.
- Hold can 8-10 inches from surface to be sprayed.
- Direct spray head away from your face and apply a thin mist coating.
- For very smooth or painted surfaces, a light buffing may produce a more desirable shine.
HELPFUL HINTS FROM THE PROS: Although Trim Shine and Vinyl and Plastic Coating will not harm or discolor most materials, always test first in a small, out-of-sight area before using. Not recommended for suede and other absorbent surfaces which may discolor. Trim Shine Vinyl and Plastic Coating will spray best when contents are at room temperature. Lower temperatures may reduce spray pressure.
Customer Reviews
Trim Shine is great for dressing plastic fender liners!
The best! Perfect for grilles and hard to reach areas like the wiper blades. It's great at self leveling. I also love the look on floor mats and it doesn't even make them slippery.
Hands down best trim spray. Works great and has a great shine you can spray it and leave it or you can buff it down with a microfiber towel. Helps bring back dull sun damage trim pieces like plastic bed caps. The plastic bumper step pad on truck bumpers and step pads on running boards spray and wipe them to keep them from being slippery. A/C vents and even some stubborn interior trim pieces that don't shine up with traditional interior products.
Read all customer reviews of Stoner Trim Shine Vinyl & Plastic Coating
Customers Who Bought This Item Also Bought
Related Items
Related Categories
