NanoSkin AutoScrub Fine Wash Mitt
$49.99
Use coupon DI499 for $4.99 Shipping on this item
Product Information
- An extremely fast and easy way to deep clean your paint
- Replaces the need for a clay bar while saving you time
- Use with your favorite detailing shampoo
- Fine grade best used on well maintained vehicles
- Product Code: AS-016
- Read full description
Product Description
The NanoSkin AutoScrub Wash Mitt can replace the need for a clay bar by safely and easily removing surface contamination! This process is much faster than a traditional clay bar and you can get the same great clean surface upon completion. This microfiber mitt has a special rubber polymer coating on one side that actually loosens and removes particles. This advanced rubber polymer technology will help you remove tree sap, residue from water marks, rail dust, road grime and other extra stubborn surface contaminants with ease. We first recommend washing the vehicle as you normally would to remove the loose contamination, but before drying we'll go back and rewash with the AutoScrub Wash Mitt. Now rinse the surface again and get a clean bucket of shampoo and water. Dip the AutoScrub Wash Mitt in your shampoo bucket and begin washing your paint with light pressure, just like your normal wash. If your vehicle is in great condition you can skip the first wash with your traditional wash mitt and go right to the AutoScrub Wash Mitt. When using the AutoScrub Wash Mitt you will be amazed at how quickly the advanced rubber polymers safely separate and remove contaminants bonded to the exterior. This means your paint will be truly clean and you can effectively apply a polish, glaze, sealant or wax afterward. Use the wash mitt on not only the paint, but the glass, moldings, plastics and so much more. If you ever drop it on the ground, no worries, just rinse the mitt clean with water and its ready to be used again unlike traditional clay bars! There is no need to spend 1 - 3+ hours with a clay bar anymore, the NanoSkin AutoScrub Wash Mitt get the job done while washing your vehicle! Very simply this is one of the most effective ways to deep clean your paint in a very short period of time.The Medium Wash Mitt is best used on vehicles with heavy build ups and the Fine Wash Mitt is best used on well maintained vehicles.
Note: With all clay alternatives, breaking them in might be necessary, especially on sensitive paint types. To break in your pad, towel or mitt, spray your clay lube onto the clay media and on a portion of glass. Rub your pad, towel or mitt in a circular motion against the glass for 30-60 seconds. Wipe your clay media clean and you are set to start using it on your painted surfaces!
Professional Detailer Reviews
My new go to is the Nanoskin Wash Mitt. I am able to use my hand inside the mitt to better feel and hear contamination being removed.
Videos
NanoSkin AutoScrub Fine Wash Mitt Demonstration
Nanoskin Autoscrub System
From The Label
Product Description
- Lasts up to 4 times longer than clay bars
- For a flawless "show room perfect" shine
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology which replaced the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the rubber clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
- For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant
- To achieve best result on the paint, use with NANOSKIN NAO SHOCK Hydrophobic Spray Lubricant Sealant.
- For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN glass Sealant.
Directions
DIRECTIONS:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 144F. Please use in an inconspicuous place for the first time in case of unexpected adverse effect on paint surface.
NOTE:
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad. moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30-60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don't use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. Total Import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 144F. Please use in an inconspicuous place for the first time in case of unexpected adverse effect on paint surface.
- Mix 1 oz of NANOSKIN BUBBLE BATH Wash & Shine Shampoo per gallon of water.
- Rinse surface with water to flush away loose dirt.
- Wash and rinse in sections with AUTOSCRUB Wash Mitt using light pressure.
- Begin with the roof, and work the suds down to the hood, trunk and sides.
- Rinse and clean water.
- Dry with clean and soft towels.
NOTE:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- Plain water is NOT an adequate lubricant
- AUTOSCRUB is not solvent resistant.
- Remove tar & grease before application.
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad. moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30-60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don't use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. Total Import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.
Customer Reviews
Love this product. Definitely helps speed the process up but still does a quality job.
If you already have a well maintained vehicle, then this product is what you need to skip the lengthy clay bar process. I had my doubts, but was pleasantly surprised. I would still recommend clay bar for heavy contaminant buildup, but if you keep good care of your car/truck, just buy this and you'll save valuable time and energy.
The clay bar is the old way, once you drop it, you are done. this one is easy to use and be able to wash and re-use it
Read all customer reviews of NanoSkin AutoScrub Fine Wash Mitt
Customers Who Bought This Item Also Bought
Related Items
Related Categories
